Installing Your Beeline Moto II Ball Mount


The Beeline Moto II Ball Mount is compatible with a wide variety of 1-inch ball mounts and clamps, giving you the flexibility to position your device exactly how you want it. Follow these simple steps to set it up securely on your bike. 

What You’ll Need 

  • Tools:
    • 2.5 mm hex key
    • 4 mm hex key
  • Bolt size (for replacements):
    • 1 x M5 x 16 mm cap head screw

Note: The 1-inch ball clamp or base ball required for installation is sold separately. Hex keys are not included to reduce waste, but you can purchase them at beeline.co/hex-keys. 

 

Step-by-Step Installation 

1. Loosen the ball clamp 
 Ensure any device currently attached to the clamp is secure before loosening. 

2. Insert the ball mount 
 Place the Moto II ball mount into the clamp and tighten until it is held firmly in place. 

3. Adjust the position 
 If needed, loosen the clamp to reposition the mount at the desired angle, then re-tighten to lock it securely. 

4. Fine-tune the viewing angle 
 To tilt the headpiece, loosen the mount’s side screw with a 4 mm hex key, adjust to your preferred angle, and re-tighten. 

5. Attach your Beeline Moto II 
 Snap your device into the mount and ensure it is secure before riding.